Every drop.
Every data point.
One control.

Analysis with Aqua Guide, field control with Metirius and central management with Predixi WIS work together in one architecture.

Energy efficiency
for water
transfer systems

For municipalities, industrial plants and irrigation unions, we provide measurement, automation and central monitoring for wells, pumping stations, reservoirs and networks.

Street cutaway: a leak on the water main and a valve chamber with a flow control valve, flow meter and pressure gauge

Pressure that
follows demand,
less water lost

Flow control valves (FCV) adjust the water entering a zone to the pressure measured at its critical point. When demand falls, excess pressure and leakage fall with it.

Bright pumping station hall with blue pump and motor sets and an open door to a clear sky

Every kWh saved
is CO₂ not emitted

When pumps run only as hard as demand requires, the same water is moved with less electricity. The carbon reduction is the electricity saved multiplied by the period’s emission factor.

Predixi WIS 3D terrain view: wells, pumping stations and reservoirs on the map
Predixi WIS utility dashboard with production, energy and alarm summaries
Predixi WIS screen of a pumping station: three pumps, total power and flow
Reservoir level screen in the Predixi WIS mobile app

Every cubic
metre in view,
from well
to network

Predixi WIS brings production, reservoirs, energy use and cost together on one screen, at utility, zone and station level.

Predixi IO plant pulse screen: device status, active alarms and scanned tags
Predixi IO well station screen: outlet pressure, flow, water level and pump command
Predixi IO recent events list: motor temperature and pressure limit alarms
Predixi IO mobile overview screen

Draw your process,
watch the plant live

Connect field signals with Predixi IO and design process screens with your own symbols; alarms, reports and automation sit in the same SCADA project.

A row of Metirius field control panels with displays
Two Metirius pump control panels side by side: one for a well, one for a pumping station
A sheet-metal Metirius field control panel with a display

Without field data,
losses stay hidden

Metirius panels measure level, flow, pressure and energy at wells, pumping stations, reservoirs, networks and wastewater sites, and control pumps and valves on site.

A hilltop reservoir and valve house at dawn, with a blue transmission main running towards the town

Optimise
every drop

From source to network we measure flow, pressure, level and energy, and run the field and the control room together so water is produced and distributed as it is needed.

Engineering for utilities, industry and irrigation

Solid Electron delivers engineering, field automation and central monitoring that raise water and energy efficiency in water transfer systems.

  • Supply and network balance

    Urban water infrastructure

    Drinking-water wells, pumping stations, reservoirs and distribution networks.

  • Process continuity

    Industry and energy

    Pump systems for boiler feedwater, process water, cooling and auxiliary plants.

  • Controlled water distribution

    Irrigation and agriculture

    Irrigation unions, cooperatives and agricultural pumping stations.

Niğde: the same water, 36% less electricity

At a water transfer rate of 800 m³/h, monthly electricity consumption fell from 1,000,000 kWh to 640,000 kWh.

Monthly electricity use at 800 m³/h

640,000kWh / month

36% less energy for the same water

  1. 01

    Field measurement

    Water transfer and electricity use were measured before the upgrade. Today we carry out this step with Aqua Guide.

  2. 02

    Controlled with Metirius

    The pumps and reservoirs were connected to local automation.

  3. 03

    Central monitoring

    Wells and reservoirs are monitored from the control room on a common infrastructure. Today we deliver this layer with Predixi WIS.

One pumping station, before and after rehabilitation

The pump and motor sets were renewed and the valves and pipework rearranged. Control panels and automation were installed, and the station was connected to central monitoring.

See all projects
Pumping station before rehabilitation: old pumps and untidy pipework
Before
Pumping station after rehabilitation: new blue pump sets and neatly arranged pipework
After

Four products from the field to the control room

Measurement, field control and central monitoring work together within one project.

  • Predixi IO well screen with flow, pressure and pump status

    Predixi IO

    Flexible, adaptable SCADA

    Draw your own process screens and bind field signals; alarms, reports and automation in the same project.

  • Predixi WIS 3D map screen: wells, pumping stations and reservoirs on the terrain with reading labels

    Predixi WIS

    Water management information system

    Production, storage, energy and cost from well to network, by utility, district and station.

  • Metirius control panels

    Metirius

    Field control devices

    Local control and measurement for wells, pumps, reservoirs, wastewater and networks.

  • Aqua Guide logo: blue water drop and aquaGUIDE lettering

    Aqua Guide

    Field measurement app

    Record inventory, flow, pressure and energy measurements and prepare data for feasibility studies.

Three ways to work with us, from engineering to operation

Choose the scope you need, from a site survey to long-term operation. Our aim is to reduce water and energy losses through measurement-based improvements.

  • Technology and engineering servicesFrom site survey and feasibility to pump selection, mechanical rehabilitation, electrical panels, automation and SCADA integration.
  • Turnkey delivery and operationCommissioning, training and maintenance, plus long-term operation with fault tracking and performance management.
  • Savings sharingOn suitable projects, the return on investment is tied to the measured energy savings.
Pumping station hall with blue pump and motor sets

What a pump project can deliver

upper bound of the potential energy-efficiency gain in pump systems
30%
payback from energy savings alone
3–4years
potential water savings through network and pressure management
~25%
potential additional energy savings from reduced pumping
~15%

These are potentials. Actual results are verified against a baseline set by the initial measurements and depend on the condition of the system and the scope of work.

References and earlier collaborations

Completed projects for industrial companies, and work for water utilities, municipalities and industry carried out through partnerships and collaborations before the current corporate structure.

Completed industrial projects

Partnerships and collaborations before the current corporate structure

Award-winning energy efficiency projects

Energy efficiency work on pump systems was recognised at the Sustainable Business Awards two years running.

Let’s look at what your plant needs.

One well, one pumping station or the whole network: in the first meeting we go through your current readings and your targets.